Beneath the Floor: Best in Slab Leak Repair | Arlington, TX

Beneath the Floor: Best in Slab Leak Repair | Arlington, TX

Photo By g-stockstudio at istock

Plumbing in Arlington, TX and beyond can be tricky, but it doesn’t have to be. And good, quality, affordable slab leak repair is no exception; in fact, not fixing a slab leak can result in higher than average water bills and the need for costly plumbing repairs. But this can be averted by seeking the services of a qualified plumber to inspect your home and check for slab leaks that you never knew existed.

Enter Benjamin Franklin Plumbing of TX, who serves Arlington and other surrounding regions. They can unearth the problem and find a viable solution to help you protect your home’s foundation and save you money on your water bill.

As you use your water more frequently, this puts pressure on your system and can eventually wear it out. A pipe can break and cause the water to sneak its way underneath your home’s foundation, thus causing it to shift, move, or break. This results in major property damage and can have an impact on your finances as you struggle to fix your home’s foundation as a result. Therefore, good quality slab leak repair service is a must if you happen to notice any signs of a slab leak.

So, what are the signs that you may need slab leak repair? One is strange colors that appear on your floors and walls, along with the sounds of running water even after active use. You may even notice heat coming out in patches among certain spots in your flooring or carpet and could also be seeing water trickling down out of your walls for no reason. Plus, you may witness a spike in your monthly water bill, which results from water that runs constantly throughout your home beyond normal use.

A sudden and unexplained appearance of mold or mildew can be another indicator of a slab leak. Even simple water stains that appear on your floors could point to the idea that there is a problem. Plus, the sudden rise of water puddles on your floor or carpets are signs that its time to look into the possibility of slab leak repair service.

Other causes that eventually lead to slab leaks are soil corrosion and the hard water build-up that eventually leads to major piping problems down the road. Sometimes water pressure can eventually lead to pipe damage, and the professionals at Benjamin Franklin recommend yearly water pressure inspections as part of a preventive maintenance routine to keep your system running smoothly.

A professional will come to your home and perform a thorough inspection using the latest in slab leak detection, from radar sensor technology to electronic equipment. Good slab leak repair service needs to start with a thorough and timely inspection so that the plumber can get the job done right.

The option of radar detection will save you far more money than traditional methods, the latter of which is focused on breaking apart the concrete beneath your floor. Although this can also help the plumber locate the source of your problem, this can cause a terrible mess and can result in unnecessary repairs to your flooring and the concrete underneath.

Considering the urgency of the problem, the professionals at Benjamin Franklin will work hard to get straight to the root of the problem. They can start by testing your water pressure, which can detect the source of the problem prior to fixing it. Sometimes a faulty pipe can be located by using a transmitter wire, where the leak can be readily spotted.

The plumber can also check by using a specialized microphone that picks up on the sounds of dripping water underneath. During the process, the entire section where the suspected leak is will be marked off so that the plumber can get an idea of where the leaky pipe is located. Once done, the microphone will be used to determine the area through sound before the repair process begins.

The professional plumbing team at Benjamin Franklin of Arlington, TX knows that slab leaks are caused by broken, faulty, or corroded pipes, and locating them without the hassle is what they can do for you. When a pipe starts to leak, your water goes in directions that it shouldn’t, and finding and replacing that pipe is the single, most important step in slab leak repair service.

Replacing the faulty pipe is no light undertaking, and that’s where a professional plumber can step in. Once the leaky pipe is located, the slab leak repair process begins.

A plumber knows that there is more than one way to fix a slab leak, and each method comes with its own perks. A simple spot repair can be used for newer systems, and it involves locating the slab, breaking it open, and fixing the pipe underneath it that causes it to leak.

The other two slab leak repair methods are rerouting and epoxy coating, both of which involve direct maintenance of the pipe itself. Rerouting involves most older plumbing and is done by replacing a section of piping that is damaged beyond repair.

Epoxy coating involves a simple inner coating application that goes on the inside of the faulty pipe and is commonly used in the event of smaller leaks. It can provide lasting protection against future pipe leaks while increasing the overall quality of your water during use. This is due to the longstanding protection that the epoxy lining offers against minerals that seep into your water supply that can have an impact on the taste of your drinking water.

Even recent construction can have a serious impact on your system and could result in major slab leaks, and that’s why you need to call on a qualified professional to install new pipework during the repair process. After an initial inspection, the plumber will go over a repair plan with you and discuss what needs to be done.

Water is important to our survival, and in order to access it, reliable plumbing is important. A slab leak is nothing to ignore, and that’s where quality slab leak repair service comes in. The professionals at Benjamin Franklin are there 24/7 to answer your questions and address your concerns.