7 Common Signs You Have a Slab Leak in Fort Worth, TX

7-Common-Signs-You-Have-a-Slab-Leak-in-Fort-Worth,-TX

Early detection is very important when it comes to a Slab Leak in Fort Worth, TX homes. If it is left undetected or unrepaired, the Slab Leak in Fort Worth, TX can cause huge costs in terms of water and structural damages to the house.

 

Therefore, you need to look out for some signs that reflect a possible slab leak inside the house.

  • A sudden rise in the water bills
  • Pooling of water at unexpected areas
  • Damp carpet or Warped hardwood flooring
  • Mold or Mildew
  • Reduced water pressure
  • Constantly running water heater
  • Areas of floor hotter than the rest

We will highlight and explain factors that you need to look for to tell a possible leak in the plumbing of your house. If you see these signs, you might need the help from a professional to get those slab leaks repaired.

Sign #1: A Sudden Rise in The Water Bills

Any water leakage inside the house would cause more water inflow and would result in higher water bills as the water now runs throughout the day and not only when you actually use the water. Therefore, if you notice that your water bills are rising despite no apparent reason for the increase in the actual consumption or usage, there might be a Slab Leak in Fort Worth, TX.

Sign #2: Pooling Of Water At Unexpected Areas

If there is a Slab Leak in Fort Worth, TX home, water will start to accumulate under the foundation of the house until it gets a way to escape. If you notice even a little water pooling at or pouring out of the slab foundation on the outside of the house, you might need to call an expert for Slab Leak repair in Fort Worth, TX.

Water can also pool inside of the house, such the bathroom or the kitchen floor. If you notice the water pooling and can determine that it is not due a leakage in a nearby water appliance, it is possible that leaking water is finding its way up in the slab foundation.

Sign #3: Damp Carpet or Warped Hard Flooring

When you have a Slab Leak in Fort Worth, TX, the water the starts to accumulate has no other way but to go up. Eventually the rising water will reach your flooring and will cause visible damages to it. If you have hardwood flooring, it might start to appear damp and warped. Similarly, if you have carpet throughout your home, it might also start to show signs of dampness.

Sign #4: Mold or Mildew

If you have a Slab Leak in Fort Worth, TX, the water might rise up enough and reach the flooring. In such cases, it will cause mold or mildew to grow on or under your carpet. Another possibility is that the water might also get absorbed by the walls in your house. Damp drywalls usually start growing molds inside them.

Even if the mold growing under or on the carpets and walls is not visible, you might start to smell it. Therefore, if you smell musty smells around the areas with carpets, you should start looking for other possible signs of Slab Leak in Fort Worth, TX.

Sign #5: Decrease in Water Pressure

When there is a leak, the water is constantly escaping the pipes, which means, lesser water is now traveling towards the outlets and the faucets when you intend to draw it.

Therefore, if you notice there has been a decrease in the water pressure, especially when all other outlets are shut, the reason for this reduced pressure must be a Slab Leak in Fort Worth, TX.

Sign #6: A Hot Water Heater that’s constantly Running

If your water heater needs to keep running in order to keep the water warm, it is just like having a hot water outlet on. This leads to the water heater run for longer periods of time to keep the water warm or it might as well need to keep running 24/7 if the leak is substantial.

Therefore, if a time comes that your water heater suddenly starts working nonstop, there is high chance that you have Slab Leak in Fort Worth, TX.

Sign #7: Areas of the Floor Hotter than the Rest

If the hot water sides of the plumbing at your home are leaking, the leaking hot water will heat the concrete directly above it. And eventually the heat from the concrete will transfer to the flooring and you might feel it if you walk barefoot.

If you have carpet, this method might not work, as carpet material is a good insulator. On the other hand if you have tile or hardwood, you will be easily able to detect hot patches on the floor through an underground Slab Leak in Fort Worth, TX.

How to Detect a Leak

If you notice any of the above signs at your home, there is a chance that you have a Slab Leak in Fort Worth, TX. It is always advised to call a professional for such matters, but here are few steps you might want to follow:

Step 1: turn of all water appliances. Also ensure water is not running anywhere else in the house.

Step 2:  Go out and have a look at the water meter. Water meter would be usually installed outside the house near the driveway or along the boundary of the property.

Step 3: Water meter usually has a cover that says ‘water meter’. Remove the cover, it should be as easy as removing a lid and would not require any specialized tools.

Step 4: Now looking at the water meter, you can detect if there is a Slab Leak in Fort Worth, TXObviously if the meter is still running it means water is leaking somewhere in the house.

What to Do Next

If using the above steps, you were able to tell that there is a water leakage in your house, wait no further and call an expert for Slab Leak repair in Fort Worth, TX.

This entry was posted in Slab Leak, Slab Leak Detection, Slab Leak Repair. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *