Homes are built on all sorts of foundations. There are some homes with basements and some built with crawl spaces under them. However, some of the most common households built today are built over concrete slabs. This is a very unique foundation since the plumbing pipes are located right underneath the ground that is beneath the concrete slab. This is the flooring that you walk on and thus puts a very small layer of insulation between you and the pipes. And while this is nothing to worry about in most cases, when a slab leak in Fort Worth, TX, breaks out, there is cause for alarm.
If your home is built over a basement or a crawl space, any leaks that may occur are easy to get to and don’t pose an immediate threat to the structure of your home. However, with a concrete floor, there is no other option but to break up the concrete to get to the pipes beneath it. However, before it comes to that, there can be a lot of time spent waiting for the leak to show up visibly as a stain on the floor or a damp spot on the floor. Slab leak detection in Fort Worth, TX shouldn’t be a matter of waiting for the damage to be done and then footing the entire bill. It should be a matter of careful monitoring to act as soon as the first signs of the leak appear.
It requires vigilance and a keen eye, and it may come at the expense of relaxation sometimes, but in the end, it’ll be worth it because it will save you hundreds, possibly thousands of dollars in the long run. SO in the interest of saving you all that money and teaching you some valuable skills, here are a few ways you can detect a slab leak detection in Fort Worth, TX without it coming to the concrete bursting with water.
Check for Puddles
If you have a concrete patio attached to your home, you should look for puddles and wet spots on it. The slab leak detection in Fort Worth, TX will show immediately if it’s there in the shape of water running out of the concrete slab on to the patio. You should also keep an eye out for wet spots that don’t go away even if you wipe them up or even if it’s particularly dry weather.
Leaks Under Cabinets and on Walls
You should monitor the nooks and crannies and remote areas of the house as a general rule once a month or once every two months to see if everything is alright. The slab leaks and cracked walls usually end up in those very places. There is a chance that the slab leak can happen under your cabinets and could also end up coming through the walls of your house. Making sure that those areas are dry should be top priority if you’re worried about slab leak in Fort Worth, TX. There should also be a general sweep of the house each month if you want to avoid them altogether.
Check the Water Heater and the Temperature of the Leak
These are two things that could be massively co-related. There is a chance that there is a slab leak in your home if the ground has hot spots in some places. You could also feel that there are cold spots in the concrete or in some places on the walls and this could tell you where the slab leak in Fort Worth, TX is coming from. If the spots are hot, it could be that the hot water pipes have been broken and it could be your water heater that is to blame. Sometimes the constant pressure from hot water and the steam generated in the water heater contributes to pipes bursting.
It could also be the case that your water heater is broken and that it’s running on high each time you turn it on. There could be a myriad ways how you could perform slab leak detection in Fort Worth, TX but what matters is that you do.
Read Your Meter
Sometimes you could even do slab leak detection in Fort Worth, TX by monitoring your water meter. Check your meter readings and then turn off any taps or showers or any appliances that use water for an hour. Then check your readings again and see if there has been a change. If there has been a significant change that means there is probably a leak somewhere and that leak could be a slab leak in Fort Worth, TX.
Check Your Water Bill
This is significantly related to the last point. If your water bill has gone up recently and you haven’t been using a lot of water, that means there is a point within your house that is leaking water. And that needs to be fixed immediately.
It’s not that hard to spot whether there is excessive water leakage in your home if you just know the signs. And it’s your home, so no vigilance should be unjustified when it’s about protecting your home. If you pay attention to these signs and act accordingly, you will not only save money, but the regret of not acting faster.
If you want to hire a service that carries out great slab leak detection in Fort Worth, TX then contact Benjamin Franklin’s Slab Leak Detectors by clicking here.